Renewable Energy Projects
Learn More About Renewable Energy | Projects | Tips | Reviews | Breaking News
Full Design & Installation Available For Solar Hot Water | Wind Turbines | Solar Panels | Micro Hydro | Off-Grid Power
Contact Andy Now For A Free, Friendly Quote or Chat On UK - 07504 50 50 89

I am a solar hot water Installer In The UK. If you require a free quotation then please do ring me on 07504 505 089 or EMAIL me.

I CAN SAVE YOU MONEY!



**************************************************************
Renewable Energy UK | Visit Our Home Brew Power Website
Wind | Domestic Wind Turbines - Good Or Bad?
Solar | Solar Panels For Your Shed Or Summerhouse?
Carbon Neutral | Recent Posts Relating To 'Carbon Neutral'
Babington Burner | Purchase Our Hand Made WVO Burning Babington Nozzles
HomeBrewPower Yahoo Group On Carbon Neutral Power Generation
 
**************************************************************

Labels: , , , , ,


Solar collectors (solar panels) mounted on a roof are connected to pipes containing a heating fluid mixture of water and antifreeze. When the sun heats up the solar collectors the hot fluid is pumped through the pipes to a heat exchange coil in the new solar hot water cylinder. Here the captured solar energy is transferred from the hot fluid in the coil to the household's hot water supply. The hot water in the cylinder is connected to the taps, shower, washing machine, etc in the usual way.

In order for the solar water heating system to run safely and efficiently, a range of valves are installed in the heating fluid circuit. A series of temperature sensors are connected to a digital solar controller to switch the system on or off according to the solar energy available.

On days of limited sunlight, solar energy alone may not be sufficient to heat the household's water to a usable temperature. In this case your conventional boiler or your immersion heater (if fitted) can be used to further boost the temperature of the solar heated water.

choosing the right system

As with all technologies there are good and not so good solar water heating systems. When choosing a solar water heating system there are a number of points to consider:

hot water storage cylinder

The size of the hot water storage cylinder is generally determined by the amount of hot water your household uses in a day.

Typical daily hot water usage:

appliance
volume (litres)
standard sized bath
60
corner bath
120
shower / power shower
15-60
washing machine
50
kitchen sink
15
bathroom washbasin
5

A new solar hot water storage cylinder is usually fitted in the airing cupboard replacing your existing storage cylinder. If the space around your existing storage cylinder is limited an alternative position or design can normally be agreed.

size and quantity of solar collectors

Allow around one square metre of collector surface area for every 45 - 50 litres of hot water to be stored.

position of solar collector

Collectors in the UK work best when facing south and at an angle of around 35 degrees from the horizontal.

durability

A well designed and constructed solar water heating system should provide many years of good service with little maintenance.

cost

Assuming a life span in excess of 20 years, solar water heating offers good value for money when comparing the initial investment to the cost of a household's current heating fuels. The costs of conventional heating may increase over the years as existing oil and gas supplies diminish and 'pollution taxes' are levied.

It is also important to consider the cost of electricity to run the solar heating system (pump, controls etc). For a typical home this is less than £5 per year.

Solar water heating cannot be considered good value if the initial system cost is too expensive. For this reason it is important to shop around for a competitively priced system using high quality components.


HomeBrewPower Yahoo Group On Carbon Neutral Power

http://groups.yahoo.com/group/homebrewpower/



Labels: , , , , , ,

DIY Solar Hot Water Heater - Doug Kalmer
Monday, 16 January 2006
This is an article written by Doug Kalmer about his DIY solar hot water heater:

"This Photovoltaic (PV) pumped hot water system has been working well, with no maintenance, for years on my house.I am now past the point where the money I invested in the solar water heater equals the money I would have spent on electricity to heat water. Most of the year, we have more free hot water than we can use. Consider the fact that in the next five to eight years you are going to pay the cost of a solar water heater,whether you buy one or not. I kept costs down by doing all of the work myself, and buying a used collector panel, but still created a long lasting, efficient, high quality system.

I started by looking in the yellow pages under "Solar", and found a plumber in the nearest large city, with spare collector panels. I bought a 3`x13` aluminum collector with copper tubing and tempered glass cover for $100, guaranteed not to leak, but I tested it first, anyway. Assuming the collector needs to be freeze protected, a non-toxic antifreeze, usually propylene glycol, is pumped through the collector, to the heat exchanger tank. The simplest way to circulate the anti-freeze is with a 12 volt pump directly wired to a small photovoltaic panel, this eliminates the need for controls of any kind. When the sun is heating water, the pump runs. I bought a matched set of a 10 watt 12 volt solar electric panel, and bronze magnetic drive circulation pump from Zomeworks. The most expensive single component was the Heat Exchanger (HE) tank. I looked at what is available, and most are built around the ordinary glass lined steel water heaters, which have a limited lifetime. For less money, I had a stainless steel tank built with 50' of 3/4" soft copper tubing in the lower half as my Heat Exchanger. It holds 85 gallons, and acts as a preheater for the regular electric water heater. Non ferrous stainless will outlast me.



Storage Tank containing Heat Exchanger


Proper sizing of the system is important. Plan on at least 20 gallons of storage tank size for each of the first four people and 15 gallons for each additional person per day. You should have at least 40 square feet of collector area for the first two family members, then add 12-14 square feet for each additional family member. Keep tank size at a ratio of 1.5 gallons or more to one square foot of collector area to prevent overheating.

Besides the pump, panel, HE tank, there are a few other parts to the system:
1) A pressure gauge (0-60psi) will let you know the closed loop has not lost it`s charge of antifreeze.
2) A solar expansion tank allows the solar solution to expand as it heats.
3) A check valve above the tank to prevent thermosyphoning at night.
4) A pressure relief valve.
5) A hose valve at the lowest point for filling and draining. It really is a reliable, efficient system, we do no maintenance to it. I can read water temperature going in to my electric water heater, and most of the year, it is above the 120* setting of the thermostat.

It's your choice-you can invest in solar now, demonstrating your support for sustainable energy, and getting free hot water after your payback period, or continue to pay ever-increasing energy bills, which indicates your support for maintaining the status quo."
Last Updated ( Thursday, 19 January 2006 )

Labels: , , ,